Automatic Hydraulic Terminal Crimping Machine

Overview introduction

Product name: AUTOMATIC HYDRAULIC TERMINAL MACHINE

Can be crimped 1-150 square cable

Suitable for new energy, flexible cables, high and low power distribution cabinets, automotive

cables, large square cables

Features

1. Powerful

2. Small and

3. Fully

4. Mold can

5. Hydraulic 

6. Small 

7. Automatic 

8. Be replaced

9. powerful hydraulic

10. Maximum crimping of 150 flat cables

11. High pressure, optional 30T/40T hydraulic

12. Can meet the maximum cable crimping of 1 50 square meters

13. small and small

14. Relative to a large hydraulic press, the

15. weight of 75KG is relatively small, and it does not take

16. Up space and can be transported freely.

17. Frequency conversion technology

18. Using high-tech frequency conversion technology, it has

19. The function of holding pressure when crimping, controlled by the

20. frequency conversion circuit, and automatically shuts down when idle

21. Lower cost

22. 40% cheaper than traditional

23. hydraulic equipment

24. Processing effect display

25. It can complete the riveting of 1-150 square wire, and can be used with a variety of cables

Product details

1. HYDRAUL IC GAUGE: Accurate display, waterproof and shockproof

2. CAN REPL ACE THE MOLD: The mold can be changed quickly and can be used with a variety of wires

3. FILTER DEVICE: Lead out the filtered clean water without bringing the filter material out of the machine, ensuring the stability of the machine

4. TOGGLE SWITCH: Fully automatic semi-automatic manual can be switched freely

Data sheet