Product overview
Product name: Crystal head crimping machine.
Product usage: suitable for various of grid lines,telephone lines,can be crimper with PC plugs ,British and American plugs.
Features:
1. Accurate crimping
2. Lightweight and no noise.
3. High efficiency and small error.
4. High-speed motor
Driven by high-speed motor,higher work efficiency.
5. Multi-ways for opening.
Arbitrary selection of contact crimping and foot crimping.
6. High precision jaws
High-precious jaws prevent pressure distortion and deformation.
Product all parts introduction:
1. Motor
2. Portable handle
3. Indicator/troubleshooting lights
4. Toggle reset switch
5. Switch
6. Upper die
7. Lower mold base
8. Modulation controller
Product details：
1. Switch adjuster:a total of 2 gear adjustments
Auto-sensing file: Put the crystal head to automatically sense and press,Sleep position: can't operate any key, Foot pedal position: can only be operated
by the pedal controller
2. indicator light/troubleshooting light:
If the light is not on, it means that the power is not turned on. Turn the mode adjustment switch to gear 1 to turn it on. If the light is not on, please check whether the fuse at the back is blown.
3. modulation controller
Control the die lifting.
4. upper knife mold:adjust the lifting height of knife template.
1. If the pressure is not enough, please loosen the upper knife fixing screw and fine-tune the pressure adjustment nut
2. If there is no puncture, fine-tune the height of the inner blade
3. Support multiple models of die
4. Lower mold base:fine-tune left and right positions.
5. Loosen the two screws on the front, then adjust the left and right nuts.
Data sheet:
| Product name | Crystal head crimping machine |
| Crimping ability | 150KG |
| Scope of application | 2p-8p8c |
| Stroke | 25mm |
| Power supply | AC 220v 50hz |
| Weight | 12KG |
| Size | 320*180*160MM |
