Views: 328 Author: Site Editor Publish Time: 2022-02-28 Origin: Site
Stripping Machine is a machine and equipment that can automatically process the outer sheath of waste wires and cables. It can automatically cut the outer insulation layer and automatically obtain the inner wire. It can mainly strip large and small wire sheath diameters. The stripping of each machine The line range is different, what type of machine is needed, we need to choose according to the diameter of our line skin.
What are the characteristics of Stripping Machine?
What is the product introduction of Stripping Machine?
What are the basic accessories of wire Stripping Machine equipment?
1. The Stripping Machine has a high-quality blade V-shaped blade: 90-degree V-shaped blade design, strong versatility, no need to change the blade during use, and the wire is flat.
2. The knob of Stripping Machine is quick and easy to adjust: the stripping length, half-stripping distance and cutter depth can be quickly adjusted by the knob
3. The Stripping Machine is controlled by pure pneumatics, which is easy to operate: the whole machine is controlled by pure pneumatics. Can work without power4. The Stripping Machine is equipped with a high-efficiency pneumatic sensor: controlled by the pneumatic sensor switch, accurate head stripping/quick response/high efficiency
The working air pressure of the Stripping Machine is not less than 0.5Mpa, and the working temperature is about 15°C. It is activated by pneumatic induction, and the tangent range is 0.3~2.03 square meters (the soft line skin can reach 4 square meters, and the air pressure must be greater than 0.6Mpa). The adjustment methods of the Stripping Machine are all knobs, and the length is adjustable from 1.5-20mm: the wire diameter is adjustable from 0.3-2.03 meters, and the length of the half-stripping glue is adjustable. The main features of Stripping Machine are high precision, high efficiency and fast payback period. Stripping Machine is pure gas without electricity, which is safe, energy-saving and environmentally friendly.
1. Incoming wire wheel: Conveying wire and stripping out the end of the wire. When stripping short wires, the wire Stripping Machine strips both the wire head and the wire tail (the length of the wire is less than 50mm). When the wire Stripping Machine is stripping, in addition to stripping the wire head, it also has the function of stripping the middle.
2. Outgoing wire pulley: Convey the wire and strip the wire tail for the wire Stripping Machine. (The wire Stripping Machine has no effect when stripping short wires, and the "cable pulley lifting knob" needs to be in the "u" position)
3. Adjustment knob for wire feeder clearance: adjust the wire feeder clearance of the wire stripper, increase the clearance when turning upwards, and decrease when turning downwards (adjusted according to the thickness of the wire).
4. Adjusting knob for the pressure of the wire feeder of the wire stripper: Adjust the pressure of the wire feeder of the wire stripper. After pulling it out, rotate it clockwise to increase the pressure of the wire feeder. After pulling it out, rotate it counterclockwise to reduce the pressure of the wire feeder. (It is determined according to the strength of the wire skin of the wire, that is, the difficulty of stripping the wire skin, the pressure will increase if it is difficult, and the pressure will decrease if it is easy)
Wenzhou Sanqi Technology Machinery Equipment Co., Ltd. strives to provide top-quality Stripping Machines with reasonable prices, efficient production time, and the most professional customer service.
