Winding and binding machine have high-speed running parts, and at the same time contains electrical systems, improper use of the operator, there is a certain degree of danger. Therefore, the pre-training of cable winding and binding machine operators is indispensable. Operators must operate formally during the production process. They should carefully read our accompanying instructions before operating, master the operating essentials, and strictly abide by the operating procedures. Avoid damage to the Winding and binding machine and industrial accidents. Next, let's take a look at the necessity of safe use of the Winding and binding machine. Here are some answers.
Here is the content list:
What are the prohibited behaviors of Winding and binding machine operators?
Things to do in the safe use of Winding and binding machine.
It is strictly forbidden to touch the moving parts when the Winding and binding machine is running at high speed. The spindle speed of some Winding and binding machines can reach 10,000 rpm or more. Unprotected contact can cause personal injury. Non-equipment maintenance engineers are strictly forbidden to disassemble any parts on the Winding and binding machine (including fasteners of various moving parts, electrical parts inside the machine, etc.). The looseness of moving parts will reduce the pass rate of the product, which may seriously cause the parts to be thrown at a high speed. Injury to people, the loose electrical parts may cause the machine to work poorly, and the serious may cause electric shock and fire hazard.
Use the machine in strict accordance with the Winding and binding machine operating regulations. It is forbidden to start the machine when changing the wire or loading and unloading the skeleton fixture. If the countdown timer is set for the winding thread, try to ensure efficiency while extending the countdown timer, to avoid the occurrence of the machine countdown. This kind of dangerous situation occurs when the employee has not completed the operation. When installing the fixture, ensure that the screws are tightened and the thimble is in place to prevent loosening; when installing the skeleton, ensure that it fits in place, and when hanging the wire, ensure that the lead wire does not interfere with the subsequent winding action.
For the safety and maintenance of the Winding and binding machine, to ensure the safe production of the enterprise and the long-term and efficient operation of the Winding and binding machine, the following points must be done: first, each Winding and binding machine must be reliably grounded to prevent Induction electricity enters the control circuit and affects the use of the winding machine, effectively preventing electric shocks. Second, the workbench and ground where the Winding and binding machine is placed must be stable and reliable to prevent vibration and falling. Keep away from heat, magnetic, vibration, and pollution sources. Do not add loads beyond the permitted range to the Winding and binding machine without authorization, such as super-large wire diameters and super-high speeds.
The winding workshops of all enterprises should strengthen daily inspections, implement and improve the daily inspection and maintenance system of the Winding and binding machine just like what you do for the wire stripping machine, and establish a standardized and complete inspection and maintenance data file to ensure the safe use and normal operation of the Winding and binding machine, and strengthen the improvement Winding and binding machine operation and maintenance and maintenance personnel training, untrained personnel are not allowed to operate Winding and binding machine.
Our official website is https://www.3qmachine.com/products.html. If you are engaged in work related to Winding and binding machines, you can communicate with us on the website.