Views: 317 Author: Site Editor Publish Time: 2022-03-16 Origin: Site
The stripper bending machine is a machine that converts the plastic sheath and metal core of wire etc. stripped. Depending on the wire diameter and material and composition of the wire, there are different suitable models. You can choose the right stripper bending machine according to your needs.
What is the basic configuration of the stripper bending machine?
What does the future of stripper bending machine look like?
What can a stripper bending machine do?
1. Running wire wheel: Conveying wire and stripping wire end. The stripper bending machine cuts off both the head and tail (the length of the wire is less than 50mm) when short wires are stripped. When stripping in the stripper bending machine, it has the function of center stripping in addition to head stripping.
2. Outgoing wire roll: Conveyor wire and stripping wire end for stripper bending machine. (The stripping machine has no effect on stripping short wires, and the "cable pull lift button" must be in the "u" position.)
3. Wire feed distance adjustment knob: Adjust the wire feed distance of stripping pliers, increase the distance when turning upward, and decrease when turning downward (adjusted according to the wire thickness).
4. Adjust the feed wheel pressure of the stripper bending machine: Adjust the feed wheel pressure of the stripping machine. After pulling out, turn clockwise to increase the feed wheel pressure. After pulling out, turn counterclockwise to reduce the pressure of the transport wheel. (It is determined according to the thickness of the wire skin of the wire, that is, the difficulty of peeling off the wire skin, the pressure increases when it is difficult, and the pressure decreases when it is easy).
With the development of science and technology, the manufacturing industry has changed from low efficiency manual production to automated production, and the stripping pliers are a high-tech processing equipment designed for wire harness processing in the cable and cable industry. The processing is converted into automated stripping. stripper bending machine is mainly used for stripping the protective layer on the outside of the processed wire, which improves the production efficiency and accuracy compared to traditional methods. It is widely used in automotive wire harness processing, aerospace cable processing, audio and data cable processing and waste cable disassembly. Recycling industry.
The bending machine of stripping machine can meet your different requirements
1. Bending machine of stripping machine can meet the final stripping
2. Bending machine of stripping machine can fulfill the function of straightening coil.
3. Bending machine of stripping machine can fulfill the function of stripping cable.
4. Bending machine of stripping machine can fulfill the function of half stripping the cable.
5. Bending machine of stripping machine can fulfill the role of cable bending.
6. Bending machine of stripping machine can fulfill the role of cable cutting.
For more information about stripping machine bending machines, please contact Wenzhou Sanqi Technology Machinery Equipment Co., Ltd. They will answer your questions with patience.